STANDARD ALLOYS INDIAHeat-resistant steels
HH or HK type, chosen by gas temperature.
IS 4522 · IS 519 · ASTM A297 · ASTM A447 · EN 10295
Home / Products / Kiln and cooler
Dispersion plates
Dispersion plates spread the raw meal across the riser duct so it meets the hot gas evenly. A burnt or eroded plate lets the meal fall as a stream and heat exchange suffers.
- Works in
- Meal dispersion and splash plates at the meal inlets of preheater riser ducts.
- Industries
- Cement
- Materials
- Heat-resistant steel
- Size
- Single pieces from 3 kg to 7 tonnes, to drawing
- Supplied
- As cast, or machined to drawing
- Inspection
- Chemistry and hardness on every heat; UT, MPI or DPT and a dimensional report as specified
- From a worn part
- Yes. Send the part or photographs with key dimensions and we will reverse-engineer it
01
How it fails and what we do about it
- 01Erosion by the falling mealGrade and thickness chosen for the meal flow.
- 02Heat distortionHeat-resistant steel with ribbed sections.
- 03Burn-through at the edgesA higher-alloy type in the hottest riser ducts.
02
Choosing the grade
Typical values from the governing standards. A metallurgist confirms the grade for your duty with every quotation.
03
What we control
- Chemistry firstChromium and nickel verified on the spectrometer for every heat and recorded against the casting.
- Designed to stay straightRibs and sections arranged so the part can expand without warping.
- Fit-up checkedSegments, hangers and interlocks checked so sets assemble on site without rework.
- Traceable to the heatEvery casting carries its heat number, with the chemistry report to match.
04
For a quotation, send any of these
- Equipment make and model, or the OEM part number
- Drawing, or the worn part or photographs with key dimensions
- The grade used today and the life it gives
- Quantity per set and sets per year
No drawing? Send the worn part or photographs with key dimensions and we will reverse-engineer it.
Dispersion plates
A metallurgist reviews every enquiry and replies with a price, a lead time or the right questions.
Or call +91 145 269 5110
More kiln and cooler parts
All kiln and cooler parts
Kiln and cooler
Tip castings and sectors
The kiln inlet and outlet: nose-ring tip castings, outlet sectors and inlet segments.
Heat-resistant steelKiln and cooler
BRD segments
Brick-retaining segments at the kiln ends.
Heat-resistant steel
Kiln and cooler
Dip tubes
Segmented dip tubes, also called vortex finders or thimbles, in preheater cyclones.
Heat-resistant steel
Kiln and cooler
Grate bars and cross bars
Clinker coolers: grate bars and the cross bars that convey clinker in cross-bar coolers.
Heat-resistant steel, Carbon or low-alloy steel